Questions & Answers for: tighten kitchenaid mixer

kitchenaid mixer not mixing push speed selector to speed I want and speed slowly dies. move lever to different speeds and all speeds slowly die remove the back cover, and try tightening the two (on ...

...KitchenAid 6 qt 575 watt mixer? I used it to make a cake, a batch of cupcakes and now a knocking sound happens when I want to use it? Sounds like something is touching, or is loose inside motor. I ...

Kitchenaid Classic -Mixer Head wobbles or shakes back and forth I was told to tighten the screw that holds the hinge pin in place. What other options do I have ??? This was a friends mixer and she ...

...KitchenAid Artisan stand mixer (325 watts/model KSM150), about 5 years old. Lately, when mixing dough for bread or cookies, the motor head of the machine wobbles a bit from side to side. In addition ...

...Kitchenaid Professional 600 stand mixer. It's about 3 years old. I tried mixing pasta dough and notice the mixer head loose. Is there a way to tighten it up -- would like to know how to get to the ...

...kitchenaid stand mixer arm wobbles when I turn it on. if the head wobbles on stand, flip mixer upside down, and tighten the pivot pin screw way deep down inside stand. you will need a long flat blade ...

mixer from the '70's that she loves. While I was checking the brushes, I over-tightened the brush cap and broke the threaded part it screws into. Can I get a new part? The Brush holder

...kitchenaid bowl height adjustment To adjust the K-5A, there is no little screw under the motor head. However, you can easily adjust it by tightening the 7/16 bolt that is accessible under the mixer ...

kitchenaid mixer KSM90 the pin hinge keeps moving out horizontally during operation If you turn the mixer upside down, you will be able to see a locing screw which holds the hinge pin in place. Center

...tighten kitchenaid mixer motor head locking lever? lever is lose as you slide it from unlock to lock position and will not stay in locked position. Can it be tightened. OBTW the beater does not touch ...