Questions & Answers for: how do you tighten a chain Cars & Trucks

...chain guide. Tighten the bolts to 28 N·m (250 in. lbs.). CAUTION: Overtightening the tensioner arm torx® bolt can cause severe damage to the cylinder head. Tighten torx® bolt to ...

...loose off the mechanical strength. So it will be ideal to have the chain replaced at least in the near future as you can for the time being tighten as continue to use, with the slapping noise

...chain guides. Tighten bolts to 89 in-lbs (10 Nm). Rotate the left camshaft until the timing mark is at the 12 o'clock position. Rotate the right camshaft until the timing mark is at the 11 o'clock ...

...chain guides and tighten the bolts to 89 inch lbs. (10 Nm). Position the lower end of the left timing chain on the crankshaft sprocket, aligning the copper link with the timing mark on the outer ...

...chain guide. Tighten the bolts to 133 inch lbs. (15 Nm). Install the upper timing chain guide. Tighten the bolts to 89 inch lbs. (10 Nm). Using a 24 mm wrench to hold the camshafts, tighten the ...

...Tighten the chain guide bolts to 10 N·m (89 lb in). Tighten the chain tensioner bolts to 10 N·m (89 lb in). Tighten the oil nozzle bolt to 10 N·m (89 lb in). Timing chain tensioner guide bolt to 10 ...

chain cover. Tighten bolts and nut to 8 ft. lbs. (11 Nm). NOTE Before installing timing chain cover, check that pin is securely fitted. Before installing timing chain cover, check that pin is securely

...chain guide. Tighten the bolts to 250 inch lbs. (28 Nm). Install left side chain tensioner arm, and Torx®bolt. Tighten Torx®bolt to 250 inch lbs. (28 Nm). Install the right side chain guide. Tighten ...

...Tighten the timing chain tensioner bolts. Do Not overtighten. Tighten Tighten the bolts to 10?Y (89?lb?in). Important: If the timing chain tensioner is not released from the installation position, ...

...chain guide. Tighten the bolt to 89-124 inch lbs. (10-14 Nm). Secondary timing chain tensioner. Tighten the bolt to 89-124 inch lbs. (10-14 Nm). VVT, secondary timing chain, and exhaust cam sprocket ...