Questions & Answers for: Nissan Sentra tighten belt

...belt and you tighten the tensioner so the belt fits snug and tighten the bolt in the middle of the belt tensioner. It is not too difficult, if you know something about mechanics. If you don't, you ...

Ad

Question about 2001 Sentra

1 Answer

...tighten up (tension) your belt and your done. If by chance you do not have this tension pulley, then you have to only put one bolt in the altenator, put the belt on like normal, pry the altenator in ...

Ad

...bolt. Loosen the bolt to release tension on the pulleys to enable you to slip the new belt(s) on. Once on, apply pressure to tighten the belts while tightening the adjusting bolt. Best of luck. ...

...tighten the belt, but when I loosen the adjuster, it does not loosen the belt. It's just the adjuster that gets completely free of any tension, the pulley stay tighten so is the the belt. Seems like ...

...belt and also the power steering belting for my nissan sentra car since last weekend. Till now every morning I start my car there will be a high pitch noise coming from the belting for at least 4-5 ...

Question about 2001 Sentra

1 Answer

...tighten the belt for the generator? Is the light coming on or belt squealing? If the light is coming on then the alternator is going out. The belt can't be tightened. You have a tensioner that ...

Question about 2001 Sentra

1 Answer

belt on my 2005 nissan sentra 1.8 and tighten the tenchner bolt and it bottom out and the belt is still loose just like the tenchner did not move. Compare the old belt to the new belt. You either have

...idler pulley. you will need to get to it from under car. once loose it seems to slide to loosen belt. Put tension on idler pulley (to tighten belt) when tightening center bolt. Hope it works for ...

Question about 1996 Sentra

2 Answers

are corroded. YOU NEED TO DO DRIVE BELT TENSION ADJUSTMENT ALTERNATOR DRIVE BELT LOOSE SLIPPING NEED TIGHTEN. WHEN TIGHTEN DRIVE BELT BELT DEFLECTION SHOULD BE 1/4 TO 1/2 INCH PLAY ON THE LONGEST SPAN

...or else there will be an adjusting bolt and nut which must be turned to tighten the belt before retightening the pulley. Sorry, I don't know your car that well so my answer is just generic. Good ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...