...belt to loose alt not charging battery, belt to loose how do i tighten the belt so that it works properly loosen the alternator and use a prybar to put tension on it and tighten it back up in
Tighten the mounting bolts evenly and to the recommended torque tightness. Step 9. Once he new pump is on and secured reinstall all mounting brackets and hoses. Step 10. Reinstall the main cooling fan
...tighten to 20 ft. lbs. (27 Nm). Install the timing belt and timing belt tensioner. Set the timing belt tension. Install the timing belt covers. Install the right engine mount. Remove the floor jack ...
belt" moulding leaves only a small **** to insert the glass pull it up carefuly from one end to remove. dont bend it its not abuse friendly!! tip the glass narrowest end down ,
...tighten a serpentine belt on 2000 chrysler cirrus V6 2.5 engine. everytime i tighten the bolt on the idler pully it tightens crooked. Try this, adjust the belt tension so that the belt is sloppy and ...
tighten loose belt the belt tensioner should keep the belt tight- if its not tight you need to replace it- cheers Denny
Usually answered in minutes!
391 Questions
242 Questions
244 Questions
193 Questions
168 Questions