Questions & Answers for: throttle sticking carburetor

...throttle flap sticking within the throttle body. The throttle flap is operated by the accelerator cable which turns the semicircular control on the throttle body. Remove the air hose to get access to ...

Ad

Question about 1997 Mountaineer

1 Answer

...at idle speed This sounds like it could be the throttle body sticking, you could try cleaning it with carburetor cleaner and re-try. If you have questions feel free to leave a comment on my

Ad

Question about , No.455 Rancher, 20" Gas - Powered Chainsaw

1 Answer

...throttle arm on the carburetor in the wide-open position with a small stick, then deal with the trigger mechanism. In order to remove the cable from the carburetor, you need to remove the carburetor ...

Question about 1990 190

1 Answer

...sticking. The gas pedal to throttle connection is actually quite simple. The pedal acts as a lever that moves the throttle able in and out. The throttle cable pushes a small lever that opens and ...

...carburetor Throttle plate sticks When I reassemble carb the throttle plate is pushed up and then sticks. Float is in tank properly, gasket sits well in its groves/slots. Seems top of plastic float is ...

Question about 1990 190

1 Answer

...throttle lever. If the valve is sticking, spray some carburetor cleaner down it, and spray the outside clean, too. Work the throttle back and forth to make sure it is free to move. For a high idle, ...

...throttle cable is sticking or the carburetor butterfly is sticking. Squirt some WD-40 into the cable that attaches to the throttle handle and onto the mechanism the cable hooks to at the carburetor. ...

...sticking. They do not go down when car is idle. Not sure of year model of car but some vehicles have a return spring to pull the throttle down, which can break. You should get some throttle body ...

...sticking? (1998 deville) Clean the throttle body/carburetor. Clean where the plates set in the body. Front and back. The throttle plate is likely coated with carbon and gunk. A good throttle body ...

...so check the linkage and find out where it is binding and sticking open. check throttle possible debris / salt corrosion or damage to linkage /cable Could be a stuck throttle clean it out and check ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...