Questions & Answers for: throttle return spring

...throttle trigger will not return to its idle position. is this a problem with spring in carburator or spring on the trigger? Its a missing or broken spring in the handle(trigger). If you look inside ...

...throttle return cable and/or the return spring is not connected or broken Don't need to know model to fix this though, just a small amount of understanding of carb assembly. Difficult to give step by ...

...THROTTLE RETURN SPRING WEAK SPRING FORCE. CODE P1251 THROTTLE POSITION MOTOR FULLY CLOSED POSITION. CODE P1231 THROTTLE POSITION SENSOR 1 AND 2 RANGE PERFORMANCE PROBLEM. SOUND LIKE PROBLEM IS ...

...return for the throttle...Try to close the throttle by hand...If there is no spring..the throttle won't close by itself....If the spring is in place...Your cable may need adjusting or ...

throttle return spring or a throttle-valve spring. This helps determine the position of the throttle cable and controls its pressure. Poor fuel mileage is when a vehicle uses excessive amounts of fuel

...or wood chips in linkage check cable for sharp bends check that the return spring is on properly throttle is a mechanical link so if its stuck something has to be holding it or the return spring is ...

free online chilton manuals throttle sticks when pushed to floor. Return spring too weak. Replace throttle return spring, lubricate throttle cable / linkage.

throttle return spring how to fit spring in throttle 009 L 247898038 remove carbi. remove throttle shaft .the spring is around shaft,.

...throttle return spring, part # 16562-z-0-000 for Honda lawnmower engine GVARA. There is no diagram in the repair manual showing the placement location. There should be an empty hole in the throttle ...

...return spring for the throttle cable is not connected Someone has left a piece out on a linkage or a return spring. Basically, the rebuild isn't complete. One of the butterfly valves is left free and ...