...to and where do i clip the end that goes to the throttle plate. WELL IT TURNS OUT YOU NEED TO ROTATE THE SPRING TWO ROTATIONS AND CLIP IT TO THE THROTTLE PLATE THAT ATTACHES TO THE THROTTLE ...
...clip and 'shoe' , which are located inside the throttle housing ( aka Control Housing) have jammed the throttle boss, not allowing it to rotate freely. If that is the case, the Throttle/Control ...
...THE CLIP AT THE TOP OF THE ACCEL. PEDAL AND REMOVE AIR INTAKE HOSE WHICH WILL GIVE YOU EASIER ACCESS POP THE CLIP LOOSE TH THROTTLE BODY BRACKET AND REMOVE CABLE AND PULL THROUGH THE FIREWALL GOOD ...
throttle body, or does that clip have to be removed? Thanks Don Depends on the year and size of motor, if it is an 80-96 f serise then it has a spring type clip that retains the cable to it if you are
Question about 2002 Sedona
...clip like thing on the throttle body end of the cable. Pull that clip out and it will let the cable move in and out of the bracket. Then hold the throttle all the way open and push the clip back in, ...
...throttle cable clip over the linkage. You may need to pry the end up with a flat-head screwdriver to get it in place.Secure the throttle cable in the throttle cable bracket located on the intake ...
Question about 2004 FXDWG - FXDWGI Dyna Wide Glide
...throttle housing Hi Jerry, ya it's a little decieving there is a tiny c-clip holding it in, usually just pulling real hard and tweeking back and forth will compress the c-clip enough to release the ...
Question about 2004 FXDWG - FXDWGI Dyna Wide Glide
...clip is released, slide the assembly out of the housing and at the very top is the throttle valve (item# 28D) it is held in by a retaining ring (item# 28G). WARNING the throttle valve (item# 28D) has ...
Question about 2004 FXDWG - FXDWGI Dyna Wide Glide
...throttle cable clip over the linkage. You may need to pry the end up with a flat-head screwdriver to get it in place. 3 Secure the throttle cable in the throttle cable bracket located on the intake ...
Question about 2004 FXDWG - FXDWGI Dyna Wide Glide
where and why it wont clip in place ! presume you mean remote cables ? cable should clip in next to throttle cable then connect to gear linkage with a clip you turn in to place to hold cable secure !?
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions