...throttle from idle, adjusted idle speed and idle mix but stalling and carb spit back remains, so I presume I need a larger idle jet. Stage 1, SEII slash cut and Thunder main jet fitted by dealer from ...
Question about 2005 XL 1200 C Sportster Custom
...body lug that may or may not be plugged with an aluminum cap that's about 3/16" thick. This cap can be drilled out to acess the air/fuel mixture screw. Turning screw clockwise will lean out mixture ...
Question about 2006 XL 1200 C Sportster Custom
...throttle body its fuel injected and it has sluggish idle and when I drive the bike jerks I don't know if it's to less of gas too much can Hi, Anonymous and the usual suspects are: 1. Severely ...
Question about 2006 XL 1200 C Sportster Custom
...cables are seated correctly. If that fails check the push pull at the throttle body to make sure the cables are in the grooves. I'll bet it was the tie downs doing some damage at the handle bar
...Throttle body controls misadjusted. 14. Damaged throttle body or intake seals. 15. Loose, dirty, or corroded ignition module connector at crankcase. 16. Faulty MAP, CKP, O2, and/or CMP sensors. 17. ...
Usually answered in minutes!
586 Questions
351 Questions
242 Questions
159 Questions
145 Questions