throttle body disconnect all electrical connectors besure to tag them with number so you can put them back in order.remove the accelerator and shift cable on the bracket then remove bracket.remove the
...throttle body. CLICK HERE to see a generic picture with the sensor mounted on the right side. Theres a black plastic "box" above the throttle assembly... Remove that to get to the throttle position ...
...LOOSE BOLTS ON THROTTLE BODY OR INTAKE.LEAKING VACUUM HOSES.DIRTY FUEL INJECTORS.BAD PLUGS AND WIRES.ALSO DIRTY THROTTLE PLATE WITH CARBON BUILD UP ON THE THROTTLE BODY. CAUSE ROUGH OR ERRATIC
...throttle body with Throttle body cleaner (follow the instructions on the can), you can pick up a can at any parts store like Auto Zone. Disconnect the air intake tube from the Throttle body and spray ...
...throttle body lever. The fuel pressure regulator vacuum hose, positive crankcase ventilation (PCV) hose and the throttle body vacuum port hose. The throttle body coolant hoses. The throttle control ...
throttle body system.. See that Long black thick hose that connects to the throttle body and air filter,, Look along it for something with wires connected to it,, thats what your looking for!! Its the
...throttle body sensor located? If you are talking about the "Throttle Position Sensor" you sort-of answered your own question. It is located on the throttle body on the oppsite side of where the ...
throttle body which helped for a few days but now the problem is back. Any ideas? Replace the throttle position sensor. Have seen this problem a few times. Check for a "sticking" EGR valve. IAC motor
air control valve, a sticky throttle plate, or a vac leak. The computer uses the control valve on the throttle body to control idle speed by regulating how much air enters the throttle body and intake
clean throttle body How to clean throttle body CRC Throttle Body Cleaner Instructions are on the can
Usually answered in minutes!
1,478 Questions
1,272 Questions
1,097 Questions
1,065 Questions
830 Questions
