...this part on a 2001 saturn? It is on the side of the throttle body.Undo the connector, remove the screws,Pull out the old one, clean the throttle body with throttle body cleaner.Reverse to
...throttle body. If you follow the intake tube from your air filter all the way back to the intake manifold, where the intake tube connects to is the throttle body. Remove the intake tubing and you can ...
throttle body cleaner through the IAC passageway through the throttle body. Make sure it's throttle body cleaner and not carburetor cleaner, the carb cleaner is to corrosive to the gaskets used on the
...throttle body. If you remove the air tube from the air leaner, you can remove he throttle body:rotate the throttle bell crank and push the throttle cable out of the crank slot. Unbolt the throttle ...
throttle body professionaly cleaned first. There is a radiator cooling hose that runs to the throttle body that may be plugged and causing the throttle plate to frost and stick. Have the throttle body
...throttle body (4 bolts) and then remove the idle air control (bolted to the TB, between the firewall and the throttle body)-clean the TB, the Idle air controller and remove the Throttle Position ...
Question about 1999 SL
...throttle body assembly ! Your vehicle has two throttle position sensors . Throttle Body Assembly The throttle assembly contains the following components: ?€¢ The throttle blade ?€¢ The throttle ...
throttle body 2000 Saturn Sl throttle body removal - YouTube ? 3:36 https://www.youtube.com/watch?v=XkA7325K51o Nov 5, 2011 - Uploaded by Mark Hofmann I removed the throttle body off my 2000 Saturn Sl
Question about 2002 L-Series
throttle body???is this a false code?? The throttle actuator opens the throttle. Your gas pedal is really just a switch that sends an electrical signal to the computer which in turn opens the throttle
Question about 2002 L-Series
...is on the side of the throttle body.Undo the connector, remove the screws,Pull out the old one, clean the throttle body with throttle body cleaner.Reverse to install. There is no idle screw to
Usually answered in minutes!
1,310 Questions
953 Questions
1,183 Questions
963 Questions
862 Questions