Questions & Answers for: throttle adjustment

...but there is not an adjustment on throttle body That is correct. throttle adjustments are controlled by the computer. Any other adjustments will need to be done with a graphing display scan

...throttle adjustment at the twist throttle hand grip. 2- At the top of the carb is a throttle cable adjustment 3- some times somewhere between the twist grip and the carb there is an adjustment.4- ...

I have some play in my throttle control how do I ajust it or should I take it in. You want some play in your throttle control. If you adjust the cables until you have no play, your throttle will quit ...

how do you adjust the throttle & idle cables on a 2009 sportser Each cable has an adjuster near the throttle grip. They may be covered by a rubber boot. Slide the boot up so you have access to the

...adjustment doesn't change. Now, twist the throttle wide open and release it. The throttle should snap closed. If it doesn't, you may have to loosen the two bolts that hold the two switch housings ...

...throttle about 12" long and connects to an adjustment piece joining it to cable2 which goes to the throttle body. Cable 3 also goes from the throttle and is about 12" long and connects to and ...

Throttle cable slack on piaggio et2 We're to find adjuster To adjust the throttle cable slack on a Piaggio ET2, you will need to locate the throttle cable adjuster. The adjuster is typically located ...

...Throttle Cable Adjustment To adjust the throttle cables turn the cable adjusters and jamnuts as short as they will go so that both cables will have zero adjustment at the start of the adjustment ...

adjust idle Hi Rick: There is usually an Idle adjust or throttle stop adjust on the throttle linkage at the Carb. If fuel injection, check the throttle control linkage for an adjust screw.

Briggs and Stratton would backfire and surge from about 1/2 throttle to full throttle. I cleaned carb, adjusted valves and governor. Now it idles at a excessively high speed and wont throttle down. I ...