...Juki DL 5555 won't pick up bobbin thread Just got an old juki 5555 and have set it up properly so far according to the manual. it won't seem to pick up the bobbin thread when i start sewing, Help! It ...
...Juki TL-98Q Loading the bobbin into the bobbin case: Snap in the bobbin case latch, and put the bobbin into the bobbin case so that the bobbin runs clockwise. Passing the thread through the **** of ...
...bobbin and the top of the sewing machine. I have tried everything. At first I liked my machine, but now I want to throw it out the window. I want to be able to quilt with ease. The threading diagrams ...
Question about TL-98Q
...Juki HZL-G 210 excite to thread the bobbin!! I have the spool of thread placed correctly, & the thread passed through the 3 designated thread areas & the thread pulled up from the inside of ...
...Juki DL555 not stitching. Needle thread and bobbin all good but needle thread dosn't seem to feed from around spring on tenson setter. Needle picks up bobbin thread ok but just won't stitch. Hope you ...
Question about TL-2200 QVP Quilt Virtuoso Pro Long Arm Quilting Machine
...case stuck. Removed throat plate, removed remaining thread from the bobbin. You should probably contact Juki support or a Juki repair person. ... Did you try another bobbin after that? What
Question about TL-2200 QVP Quilt Virtuoso Pro Long Arm Quilting Machine
...juki tension top and bottom loose,top tension mechanism tight what do i do? Remove the thread from the machine. ALWAYS RAISE the presser foot and re-thread from the beginning. Verify that the thread ...
Question about TL-2200 QVP Quilt Virtuoso Pro Long Arm Quilting Machine
...JUKI DNU 1541-S? hi sally. When the bobbin thread shows on the right side, the needle tension is too tight or the bobbin thread, too loose, as shown in the middle drawing at right. When the needle ...
Question about TL-2200 QVP Quilt Virtuoso Pro Long Arm Quilting Machine
lighter weight thread will affect the bobbin tension. Otherwise, perhaps the bobbin case is worn. Look for a replacement bobbin case. http://www.sewvacdirect.com/juki-bobbin-case-fits-tl2000qi-tl2010q
Question about TL-2200 QVP Quilt Virtuoso Pro Long Arm Quilting Machine
Juki DNU-241HU industrial sewing machine picking up bobbin thread but not stitching. What do I look for to fix this? Machine not stitching but pulls the thread from bobbin. Help, what do I adjust to ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions