Questions & Answers for: how to thread pulleys Sewing Machines

thread breaks I have a husquvarna MD# 300 Designer 1 . it keeps breaking the thread. Hi! Check to see if the lower thread be tangled. Also, the bobbin could be threaded improperly in the shuttle hook.

...rnachine head has locked. (Is it possible to turn thepulley lightly by hand?) Check whether the thread has been tangled in the pulley of the sewing machine. Check whether the thread has been ...

...Check whether the tread has been tangled in the pulley of the sewing maichine. Check whether the thread has been tangled in the motor pulley shaft. Check whether the thread has been caught in the ...

...move the needle. The needle will move with the pedal. Also, I am having trouble getting the bobbin thread to come up. Please help. Thank you. hi there; well try to rotate hand wheel center holder ...

...thread appears to be done right however when i step on the 'gas' the needle doesn't move? see user manuals check all wire and conect. if engine is running and turns the pulley and the pin is still ...

Is the bobbin suppose to spin? Is the bobbin suppose to spin? The needle thread won't pick up the bobbin thread. The bobbin in fact has NO reaction while I turn the wheel on the side. Not sure what is

how to tighten belt on Juki ddl-5550 we had a spool of thread wrapped around the belt pulley thereby loosening the pulley so that it doesn't catch to sew without manually turning the wheel, I ...

and motor pulley v-grooves must be clean. This is to say, that they cannot have any particulate or threads wrapped around the grooves. 4. The pulley will be automatically pre-tensioned to a 7 o'clock

...of SC 810 control box of Juki Hi Mohamed regarding Error E 071 of SC-810 control please check : 1- thread trimmer cam correct adjusted or not. 2- there is a lot of thread into motor pulley or

...slows down is there a switch the mechanic uses to do this Check the pulley on your motor. Sometimes thread gets wrapped around the pulley and can cause this. If this is the problem, take the belt off ...