Questions & Answers for: how to thread pulleys Dryers

...propells again but the nut falls off again. I am thinking the large black pulley is supposed to be threaded. Not sure. I am wondering if my pulley has destroyed threads. Any ideas on this problem? ...

thread breaks I have a husquvarna MD# 300 Designer 1 . it keeps breaking the thread. Hi! Check to see if the lower thread be tangled. Also, the bobbin could be threaded improperly in the shuttle hook.

is the crankshaft pulley aright or left handed thread 1998 ford ranger 2.5L 2wd. I'm replacing the timing belt and need to know if the crankshaft pulley is right or left handed thread. The bolt in the

crankshaft pulley removal Of course an impact wrench will help will loosening the nut but you need a spanner wrench to hold the pulley in place. On the pulley of my '96 Camry there are four threaded ...

Idler Pulley Removal Is it pretty easy to remove the idler pulley? Do you just remove the bolt or what? Also, are the threads just regular threads or are they reverse threads? Any help would be ...

...puller, that grab's on the raised lip on the center of the front of the pulley,the puller has a threaded shaft that presses against the center shaft of the power steering pump while pulling the ...

...1.6L engine, having problem getting the bolt on the crankshaft pulley loose. Is it a left hand thread or a right hand thread. The crankshaft pulley bolt loosens by turning Counter-Clockwise. ...

...pulley to get the pump out? female hex head pulley hub/shaft cracked and is it left or right hand thread? Usually you have to take a pulley puller kit and just pull the pulley off the shaft.  ...

...lock the crankshaft, use ST. ST 499977400 CRANKSHAFT PULLEY WRENCH (1) Clean the crankshaft pulley thread using an air gun. (2) Apply engine oil to the crankshaft pulley bolt seat and thread. (3) ...

...lock the crankshaft, use ST. ST 499977400 CRANKSHAFT PULLEY WRENCH (1) Clean the crankshaft pulley thread using an air gun. (2) Apply engine oil to the crankshaft pulley bolt seat and thread. (3) ...