Questions & Answers for: Chevrolet Corvette how to thread pulleys

how do you remove the leather gearshift cover on a 6 speed 2002 corvette the six speed in these cars is a t56 tremec trans. the gearshift knob on these are just threaded onto the shifter lever. it is ...

Fan Drive Belts & Tenision Pully I have a 1973 Corvette with a 454 engine. The V-Belts on the engine run the engine fan, A/C, Alt, & Power steering pump. There is the inside belt taht runs ...

...and pulley have someone check them for any damage and go from there,if you replace the bolt use thread lock on the threads to stop it from doing it again. The balance is bad it's self, no pin no ...

how do i change the fan belt on a 1998 corvette? Hello, this is a very easy job.The main thing is to look at the routing of the belt very carefully before you remove it. It looks so simple at first ...

I cannot install the power steering belts. Do you have to remove the pulley to install the belts? no - no need to remove the pully. If you are certain you have the correct size belt, there should be a

crank shaft pully makes noise the crank shaft pully wobbles and the belt rides part way off the pully Cranshaft pulley is bad,probably has rubber damper which is damaged or worn loose.Don't run it

...pulley to get the pump out? female hex head pulley hub/shaft cracked and is it left or right hand thread? Usually you have to take a pulley puller kit and just pull the pulley off the shaft.  ...

How do I remove the power steering pulley female hex head hub/ shaft is cracked You don't. Once shaft cracks it will crack pulley when pressing off. Shaft now expanded to large.

fan belt keeps coming off my zz4 fan and alt. Check pulley alignment or a bent over pulley from a possible failed bearing.

what belt goes in the middle belt groove, of 3 grooves on a 1968 327 corvette with air pump. no a/c. has power steering and alternator? alternator belt is closest to engine. air pump is by fan blade ...