Questions & Answers for: how to thread pulleys

Ad

Question about U6630-900 WindTunnel Bagless Upright Vacuum

1 Answer

...propells again but the nut falls off again. I am thinking the large black pulley is supposed to be threaded. Not sure. I am wondering if my pulley has destroyed threads. Any ideas on this problem? ...

Ad

is the crankshaft pulley aright or left handed thread 1998 ford ranger 2.5L 2wd. I'm replacing the timing belt and need to know if the crankshaft pulley is right or left handed thread. The bolt in the

Ad

Question about 1995 Rodeo

1 Answer

crank shaft pulley on the crank shaft pulley, does it have right or left handed threads? Should be a right hand thread . Only left hand threads I have come across are Honda's and some Mitsubishi's. It

Question about 1999 Camry

2 Answers

crankshaft pulley removal Of course an impact wrench will help will loosening the nut but you need a spanner wrench to hold the pulley in place. On the pulley of my '96 Camry there are four threaded ...

Question about 1997 K1500

1 Answer

Idler Pulley Removal Is it pretty easy to remove the idler pulley? Do you just remove the bolt or what? Also, are the threads just regular threads or are they reverse threads? Any help would be ...

...puller, that grab's on the raised lip on the center of the front of the pulley,the puller has a threaded shaft that presses against the center shaft of the power steering pump while pulling the ...

...1.6L engine, having problem getting the bolt on the crankshaft pulley loose. Is it a left hand thread or a right hand thread. The crankshaft pulley bolt loosens by turning Counter-Clockwise. ...

...pulley to get the pump out? female hex head pulley hub/shaft cracked and is it left or right hand thread? Usually you have to take a pulley puller kit and just pull the pulley off the shaft.  ...

...lock the crankshaft, use ST. ST 499977400 CRANKSHAFT PULLEY WRENCH (1) Clean the crankshaft pulley thread using an air gun. (2) Apply engine oil to the crankshaft pulley bolt seat and thread. (3) ...

Question about 1997 Outback

1 Answer

...lock the crankshaft, use ST. ST 499977400 CRANKSHAFT PULLEY WRENCH (1) Clean the crankshaft pulley thread using an air gun. (2) Apply engine oil to the crankshaft pulley bolt seat and thread. (3) ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

D. Floyd Kolb
D. Floyd Kolb

Level 3 Expert

43501 Answers

Are you a Vacuums Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...