...thread will not catch for anything. I tried just sewing without catching it first and it still will not catch. Help. I have tried everthing to get the needle to catch bobbin thread. I have tried ...
Question about 3343 Mechanical Sewing Machine
...thread. readjust the hook to just grab the thread loop as the needle raises it will take a few tries to get the exact setting for the hook (maybe you will see a mark on the hook shaft to show you ...
Question about 3343 Mechanical Sewing Machine
...thread is not catching the bobbin thread the needle bent during sewing and since i put the new one in,the main thread is not catching the bobbin thread when the machine is sewing. think it might be ...
...catching thread There isn't a problem with the timing of the needle and shuttle. When the thread is hanging loose (aka when not using fabric) the hook catches the thread just fine, but when ...
...thread is not catching bobbin thread My bobbin thread is not catching. I've checked for broken threads in the bobbin case, cleaned bobbin case, rethreaded both upper thread and bobbin, and ...
Question about 3343 Mechanical Sewing Machine
...catching thread without bobbin case in, but when I put bobbin case and bobbin in machine it doesn't catch bobbin thread. Is this still timing Removed bottom of machine and fixed timing by adjusting ...
catching the thread. If you find a place on the hook that is catching the thread you can use a little piece of sand paper then use some clear finger nail polish to smooth it out. That should take care
...stitch zigzags Your timing is off. The hook must catch the thread on both sides. This is an indication that the needle bar is rising before the hook can catch the thread on one side of the zig
Question about 3343 Mechanical Sewing Machine
...catching the upper thread by the hook. The upper thread via the hook shuttle surrounds the bobbin making the stitch. All machines have to achieve the same function but accomplish it through different ...
Question about 3343 Mechanical Sewing Machine
...thread catching when trying to pick up bobbin thread Have removed hook race and can't determine why the top thread is catching as it enters the hook race. Will not pick up bobbin thread Janome, would ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions