...thermal printer My thermal printer is very slow and and the letters are not clear.pls suggest asolution your print driver is printing in graphics mode or in reduction mode. disable print spooling, ...
Printer not printing clearly Our printer is not printing clearly and I would like to know how to clean the rollers and internal components? Many thanks change your thermal printing paper
...printing, i looked in printer que, there's some printing items that i cann't get cleared. i think this is why i cann't print. i don't know what to do Hi, right click the items in print queue and ...
Question about BIXOLON Samsung Kps SRP350 Thermal Receipt Serial Drk Gray Ac Printer
printer (samsung bixolon SRP350plus) does not print clearly anymore. I cleaned the thermal head with the cleaner but got very minimal result. is there anything else i should do? Thermal heads wear out
...printer is Argox X-2000+ .Can you help me on this matters? Hello ! This model is an thermal printer. The thermal printhead need to be cleaned with isopropylic alchool with a cotton bud. All the best
labels, it works fine.Replaced print head with partno. SSP-104-832-AM41 752Ohm. Previous heads resistance was 772Oham Check to see if your tags are meant for thermal transfer printing? Hope this helps
Question about TSP-800 Thermal Receipt Printers
...thermal printer offline? printer installed, print que says it is offline Hi Valued Star UserPlease try restarting the computer, this will reset the printer spooler, clear any existing print document ...
print not clear from printer properties --> preferences --> device options --> 1- speed setting ( set it to low speed to have clear print) and 2- Head setting ( set darkness to upper digit to
Question about Pro L ID Thermal Printer
...printer is printing front clear but the back is not clear. it is just making the back like it is erasing Hi, Its not clear what you are saying. First, what kind of ribbon are you using for printing, ...
Question about Pro L ID Thermal Printer
what's the problem? The thermal printer head is faulty.nyou have to replace the thermal printer. If you wish to get some more details then check the following link. http://electro-medical.blogspot.com
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions