Question about Architect® KEBS277S Electric Double Oven
...probe temperature or remove probe". The probe is already removed. It will not respond to any other key functions. Model # KEBS277 Press "0". We just had this problem with our Kitchenaid Superba ...
...temperature probe (oven temperature sensor) terminals at the EOC (electronic oven control) plug. It will be about 1100 Ohms at the room temperature. If the resistance at the EOC plug is wrong, then ...
...temperature probe (aka oven temperature sensor) terminals at the EOC (electronic oven control) plug. It suppose to be about 1100 Ohms at the room temperature. If the resistance at the EOC plug is ...
...temperature probe This code will occur if temp. probe is detected as shorted continuously over 5 seconds. Replace temperature probe.F6 Shorted temperature probe This code will occur if temp. probe is ...
Question about 79012 / 79014 / 79019 Gas Kitchen Range
...temperature probe (aka oven temperature sensor) terminals at the EOC (electronic oven control) plug. It suppose to be about 1100 Ohms at the room temperature. If the resistance at the EOC plug is ...
Question about 24 in. LXIH-3 Built-in Dishwasher
...probe (because that's the temperature displayed during the fill cycle), located under the large removeable screen inside the dishwasher. To test or replace, remove the small access panel at the lower ...
...temperature probe sensor (temperature probe sensor is either open circuit or short circuited). Check first the temperature probe connectors, tighten loosely fitted connectors on wiring harness and ...
temperature probe (aka oven temperature sensor) terminals at the EOC (electronic oven control) plug.It suppose to be about 1100 Ohms at the room temperature.If the resistance at the EOC plug is wrong,
Question about Fluke/Raytek FoodPro Plus Food Safety Thermometer
probe, the temperature goes straight up and then errors, red light and all the numbers turn to 88888, anybody got any ideas? Is the probe extended when this condition occurs? Probe Mode To measure the
Question about PLEF398AC Electric Kitchen Range
temperature probe (aka oven temperature sensor) terminals at the EOC (electronic oven control) plug.It suppose to be about 1100 Ohms at the room temperature.If the resistance at the EOC plug is wrong,
Usually answered in minutes!
924 Questions
608 Questions
343 Questions
293 Questions