Questions & Answers for: Ford Ranger how to tell if gear

gear selection problems. I suspect that the "curb" was more than the truck's clearance could handle, and that there is more damage under there than what meets the untrained eye. Rather than try to fix

...XLT 2001the gear stick makes a strange rateling sound when iam in 5th gear could you tell me what it could be please If you haven't done it lately, it's time to check your transmission gear oil

...gear back in time i have a manuel but it doesn't tell you a whole lot on how to do it you have to put the #1 piston at tdc, then put the cam in at the mark. Depends on the engine. In the 2.3 set #1 ...

...for free. The computer does control the transmission for shifting gears. Any trouble codes will tell you if the transmission has a bad sensor or bad

gear 2003 ford ranger 4X4, 5 speed. Can;t be sure on this one except to tell you that you may have a bent or broken shift fork in the tranny. The only way to find out is to remove the shifter from the

...gear. Can you tell me why?? Your clutch is not releasing all the way. (Assuming the problem is not internal to the transmission) Bleed the system. If that doesn't work, rebuild the clutch master ...

...way to tell is to remove the drive shaft and start and run the truck and put it in gear with the drive shaft completely removed, and if it stays running then you know it is in the torque

Tell me something was the truck taking off in 2nd gear before you took it in for rebuild. And still the same as when you had it done ... If yes then they dident do a good job infact they dident do any

...is there a way to tell for sure Hold the brake pedal down,and try and start the engine in neutral,and drive,and between the gears.You can adjust the gear linkage under the truck ,on the

...the clutch pedal get a sm all spanner and when the person has pumped the pedal lets say 10 times tell them to hold the pedal in and dont let it out until you have opened the bleed screw and ...