TECHNICS SL1200MK2 RPM Buttons getting stuck.. After 7 years of faithful service, my SL1200 MK2 33 and 45 RPM buttons are jamming up..Sometimes the light is on both when I try to switch between 33 and
in the plug but it didn't work. Can somebody help me? Cheers Do the lamps ( 33/45, strobe, pitch at 0, pop up light ) light up when you turn them on. Was the storage climate controlled? Keep me posted
Technics sl 1210 MK2 does not start Hi. I opened my mk2 to be able to fix the "groundcable" which was teared out. There i saw that the whole ground gum was full of some kind of dried fluid. Probably ...
...Technics sl-1200 major pitch control issues. Intermittently when turning on the unit both the 33 & 45 light come on & the platter spins @ mach 5. Im sure it's related to the On/Off control. There ...
...Technics Sl-1210 MkII's and one of them spins too fast sometimes when I hit the start/stop button. It doesn't do it all the time but it's getting more frequent. Pressing the 33/45 buttons or moving ...
...33/45 seems fine.... Then every half second the speed increases slightly, then goes back to the 33/45 speed. Any suggestions? You have drive issues. There is no easy way to fix or to isolate the ...
...1210? Instructions on replacing your pop-up bulb can be found here: <a href="http://1200s.com/Service/Tech/Settings/pop-upbulb.php">REPLACE TECHNICS POP UP LIGHT / BULB</a> - OPTiC The ...
Why my technic 1200 is playing 45 at 33 and 33 at 45? Have the buttons been swapped around?. 33 should be on the left.
...33/45 buttons. Try to change speed with the board loosened off. If none of the above makes any difference replace the quartz lock neon. Use only original Technics neon. As a matter of interest have ...
Technics SL-1210M5G Turntable WHEN I CHANGE SPEEDS FROM 33 TO 45 OR HIT THE STOP BUTTON THE PLATTER RUNS AWAY TO APPROX 60RPM. ANY IDEAS? 1 If it's a belt turntable - the belt slips off. 2 A ...
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions