sensor, pulses are generated. The rotor has 60 tooth positions set at 6° intervals with three teeth missing. The gaps identify the TDC position of the 6 cylinders during one complete engine cycle (two
...sensor , the coil relays ,and the inition module .check injector and light flashes, check spare plug and have spark, good compresion and good fuel presure still won't start .please need help Timing ...
...TDC Sensor on the XJS is in the front of the car -under- the crank (main) pulley. The Speed Sensor is under the car attached to the flywheel cover. Two wires, two small bolts on each, they are also ...
...sensor located in the lower flywheel housing and keeps no.1 cylinder on tdc. and two locking bars bolted over the front of the camshafts to keep them in the correct positions, the camshaft sprockets ...
Question about 1998 XJ8L
TDC related to piston one and should be as such. Phase one remove Drain the cooling system. Remove or disconnect the following: Negative battery cable Valve cover Intake manifold Radiator hoses Heater
Usually answered in minutes!
1,706 Questions
1,411 Questions
907 Questions
707 Questions
655 Questions
