Questions & Answers for: Westinghouse tcon board

...is what will usually go bad on a panel. Probably a main board, unless I got a faulty TCON that does the exact same patterned distortion, doubtful. It's the main board. That's my final answer

...TCon board usually has 2 very thin ribbon like cables running from connectors on the board to the actual LCD screen panel. Each ribbon controls one half of the screen. If you are lucky, it's possible ...

...TCON board has already been replaced? I just replaced the TCON board on my lcd tv because I had audio but no picture and that was what I found in researching online. The set worked great for about 3 ...

...Tcon board. I would suggest to measure the fuse in the Tcon board labelled as CP1 or check for 12 volts on one side of the fuse (VIN) and then on the other side. If the voltage is absent on the IN ...

The TCON board or the LCD panel is faulty. Can confirm by replacing the TCON board If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com

...TCON board or the LCD panel is Faulty. Can confirm by replacing the TCON board . If you wish to get some details; check the site linked here. Pull up older posts..

Have had problems locating a westinghouse 35-d013141-l tcon board. Is there a sub for this board? None are available.

...TCON board or thr LCD panel is faulty can confirm by replacing the TCON board . If you wish to get some details; visit the site linked here. Pull up older posts.

...TCON board. I repaired mine by removing the end clip and trimming off about half a millimeter with scissors very carefully making shure it was still strait. The end clip will come off by lifting the ...

Westinghouse tv 40 inch led screen flickers but sound is good. Could be a Tcon board issue