Questions & Answers for: Olevia tcon board

...Tcon board. It is not properly decoding the signal coming form the main board correctly. The only way to fix it is to replace the Tcon board. You might have a hard time coming across the part because ...

...SOUND IS FINE. you have one of two posible problems 1 being the tcon board cheap item but hard to find other being lcd panel there is no way to really tell till a tech was to try one or the ...

...on would give a short term remedy. Now the other side is having the problem where the whole screen is going black. Any suggestions on problems, solutions? Replace the Tcon board and see if that ...

...TCon board usually has 2 very thin ribbon like cables running from connectors on the board to the actual LCD screen panel. Each ribbon controls one half of the screen. If you are lucky, it's possible ...

...tcon board or the LCD panle is faulty. Can confirm by replacing the TCON board . If you wish to get some details; visit the site linked here. Pull up older posts.

...board on my 42" Olevia TV Exactly what harness are you trying to remove?...are you referring to the flat ones that go from the TCON to the panel? or the ones that connect the power supply to mother ...

Flickering with horizontal lines appear after about 1 minute after turning on the TV. What part to replace? The tcon board is responsible for the image on your screen as well as any anomalies you see

...and then gets lines and static in the picture and then shuts down. What is the problem? I would look at the cables going to and from the TCon board, sounds like something may not be making good ...