Questions & Answers for: Dynex tcon board

...tcon board, located at the back of the LCD controller. I'll need the exact TV model number in order to be able to tell you what exactly the board number is. It is not guaranteed - it may be the main ...

...TCon board and this fixed the problem for about a month. Now the same problem has occurred again. Could this be another TCon board. They are hard to get and expensive. the tv is cheap rubbish m8 it ...

...TCon board. It is the board on the top of the set. Pull the cable or cables out and put them back in. Make sure they are in straight and tight. Do this on both ends and make sure the TV is unplugged. ...

...No components hooked to TV. First problem ever. the Tcon board or the connections for the Tcon check the wire connections going to the t con and also from the Tcon to the Tab bonds on the LCD

...than the other Tcon board either has an issue or the LVDS cable may have a connection issue. try replugging the cables into the tcon if that doesnt help the Tcon will most likely need to be

...If you are a tech or know something about lcd tvs, lvds connector from main board to Tcon board needs to be cleaned. Connector and flat cables from Tcon to lcd panel are also to be cleaned. Good ...

...TCON board or the LCD panel is faulty. Can confirm by replacing the TCON board . If you wish to get some details; visit the site linked here. Pull up older posts.

...Tcon board and make sure its seated correctly, also remove the 2 flat connectors that go from the Tcon board to the panel and make sure they are all the way in when you close the flap that holds them ...

Dynex tv shows picture but kinda faded an different colors one side has lines up an down. Is this the t-com board I'd start with a new tcon board and if it doesn't fix it chances are its a bad panel