Questions & Answers for: taurus idle sensor

...new, plugs are new, mass air flow sensor is new. check the vacuum hoses and make sure none of them are off and check the timing and also the drive belt 2006ford taurus will not start even when ...

...Taurus. Will not idle. No check engine light. 2000 Taurus 3.0l 24v Engine dies at idle. Check engine light is not on. I have replaced the idle solenoid/valve, throttle position sensor, and air flow ...

.... 1991 ford taurus 3.0 engine does the idle drop if u disconnect the idle speed control air bypass valve at the throttle body? no it does not The idol stays 2000 RPMs and it will not take ...

...taurus idle problems had trouble codes 2003 ford taurus idle problems had trouble codes p1131 and p0174. any ideas where to start A code P0174 may mean that one or more of the following has happened: ...

...taurus s/w idling high. any ideas? Sometimes a high idle can be caused by the oxygen sensor being faulty. These are available cheap on E bay @ CBS automotive. I have a contour which had the same ...

TAURUS IDLES BAD It will start to idle real low. Is it a sensor? i recently had this issue with my 2001 taurus dohc engine. when you drive it seems that everything is fine. when you stop, the car will

...taurus doesn't idle down until warm when driving 2005 Ford taurus idles to fast. I replaced the idle air control,throttle position sensor and mass air flow sensor. It is better but still idles too ...

taurus 2002 idle I have a low idle on my 2002 24V DOHC Taurus, 202,000 km, around 500rpm when the engine is up to temperature. The oil pressure light started to flicker so I had the sensor replaced ...

2006 ford taurus idling roughly. Replaced idle control valve but car still idling rough MAF (mass air flow)sensor or o2 sensor and exhaust MAF can be cleaned many sites tell you how too

...taurus rpm go up and down nothing Scan for trouble codes at local auto parts store. Possible Idle Air Control motor or throttle position sensor, or a big vacuum leak. Idle Air Control Valve ...