Questions & Answers for: taking dyson dc07 apart

...roller doesnt appear to be broken. I have a dyson dc-07 and the brush's bar will not turn. http://www.dyson.co.uk/support/help.asp?product=DC07-SY&article=527 here's a link that might help good ...

...dyson DC07 has no suction. motor runs, brush spins, just no suction. hi..the reason to this problem may be the bottom pieces might not have been fully seated.Take it apart and put it carefully back ...

...dyson dc07 wont stay on. Read it could be the spring. Wanted to check myself but am unbable to get apart. Removed screw, have pulled on it but do not want to break it. Is there a trick to taking it ...

...We have the DC07 Animal and the belt isn't turning. We tried taking apart but can't get to it. Here is a link to the belt you need and to the manual which has instructions: Dyson DC07 Belt and ...

My Dyson DC07 is making a sound like the beater is picking up gravel and the beater is not rotating. you need to take it apart to fix . serch driver repar on your pc.

...Dyson. We would not recommend that you take the cyclone top apart. This part is designed to be a sealed unit and taking it apart may affect ther performance of your machine ongoing. If you are ...

...dyson dc07 all floors and have a new belt- I have removed the black cover but cannot see where to attach the new belt ! Hope you can help-Carole Hi there Carole, VacuumGuru here. I have made a video ...

...dyson dc07 How do you take the switch apart To replace the. Switch pull the handle out to remove the screws holding the switch cover on. Release the tabs to remove the cover to expose the

...Dyson DC07 Workshop Manual All you need to know to perform... also sheck the switch Dyson DC17 Switch 910971 01 Sounds like the on/off switch is defective. Fairly easy fix. Take off the wand and hose ...

Dyson DC07 Canister goes through taking the top section thoroughly apart, and has some notes about things needing to line back up properly, which might help in the event that you're not getting things