Questions & Answers for: Jeep Grand Cherokee tailgate lift support

...TAILGATE, AND REAR LIFT WINDOW WON'T OPERATE WITH EITHER KEY REMOTE OR INSIDE SWITCH. THEY ALL QUIT AT SAME TIME. HOWEVER THE TWO FRONT DOORS , DRIVER AND PASSENGER STILL WORK FINE WITH EITHER REMOTE ...

...tailgate sensor, on my Jeep Grand Cherokee Limited 1996,keeps saying that it is open when it is not, I have tried to shut it repeatedly but it will not work. how can I fix it? that sensor is part of ...

turn signals I need to replace the turn signal bulbs and have no idea how to access them. The ones on the rear you have to lift the tailgate and remove the lenses to access the bulbs

...lift window by reaching into the inside tailgate panel and releasing the catch. I have reached down to try and do this to the tailgate, to no avail., tried spraying with WD-40 etc. I cannot get the ...

...lift gate or glass don't open. you have to get in behind tailgate interior trim and pull handle lever as this has come off from the actuator,once tailgate is opened remove panel and relocate actuator ...

lift gate won't open The latch plate inside the tailgate is adjustable. The problem is that YOU (Yes I had to on my Son's Gran Cherokee) have to take the inside door panel apart while it is still ...

...tailgate with a strong broom handle or piece of wood or have a helper hold it up. The lift supports are pressed on to a ball post. There should be a retaining clip, that slides up slightly, on each ...

...tailgate latch mechanism without compromising the integrity of the plastic panel that covers the inside of the lift gate? 1997 jeep cherokee You just go to the link I attached I'm sure you will get ...

...tailgate flip-up glass are closed. If the VTSS Indicator Lamp flashes rapidly and after approximately 16 seconds changes to a slower flash, the system is operational. However, If the indicator fails ...

...tailgate lights to go off inside car light on dash board says lift gate is open Check if the sensor is dirty or debris is stopping the sensor from working. The sensor may need to be replaced or the ...