Questions & Answers for: GMC Sierra tailgate lift support

Question about 1995 Sierra

1 Answer

tailgate How do you remove a tailgate Open tailgate, remove straps or bars on each side. Lift passanger side corner up and out, then you can pull the rest out no problem.

Ad

...from the Master Cylinder or one from a Caliper on?????????? To change the brake light.....lower the tailgate. Find and remove the two phillips-head screws on the side of the box near the tailgate ...

Ad

tailgate latch will not lock when closed There are two Possibilites with this issue ... Either the latches are bound or rusted and can be lubricated with lithium grease after cleaning or the plastic ...

2000 GMC Sierra tailgate won't unlatch on right 2000 GMC Sierra tailgate won't unlatch. How do I get access to the mechanism? Does the bezel pull or pop off if pryed off, giving access to handle and ...

how to change the hinge on the tailgate, the hinge on the body just bolts on. how does the one off the tailgate itself work? for strength it is usuall one long thick bar kinda like a watch, find that ...

How do you get the old tailgate latch out of the tailgate? The latch or handle? both will need you to take the bezzel off from around the handle on the tailgate. Careful but dont feel bad if it breaks

Question about 2000 Sierra

1 Answer

the tailgate on my 2008 sierra won't unlatch. I have a solid tunneau cover which locks from the inside, so I can't get at the tailgate. Is there anyway to unlatch from the outside? if you carefully ...

Question about 2005 Sierra

1 Answer

Went out camping and I cannot get my tailgate to open. try pushing on tailgate while gently wiggling handle- sounds like lock tabs are not engaged straight across

Tailgate won't open on 1994 GMC sierra c1500 Tailgate won't open.pin on driver side disengages when pulling handle but passenger side goes about halfway. what steps should i take to fix? ...

my tailgate on my truck wont let down Open up the tailgate by removing the screws on the inside of the door T15 or T20 torx bit is required. Disconnect the latch mechanism by unsnapping the plastic ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

1998 GMC Sierra
1998 GMC Sierra

987 Questions

1997 GMC Sierra
1997 GMC Sierra

847 Questions

2000 GMC Sierra
2000 GMC Sierra

676 Questions

1999 GMC Sierra
1999 GMC Sierra

601 Questions

1994 GMC Sierra
1994 GMC Sierra

604 Questions

Manuals & User Guides

Loading...