Questions & Answers for: tailgate lift support

Ad

Question about 2007 Tundra

2 Answers

...off the inside panel on the tailgate and the rod from the lift handle to the latch was disconnected at the latch ( on the driver side). Simple to reattach and works fine ever since. Hope this

Ad

Question about 1995 Sierra

1 Answer

tailgate How do you remove a tailgate Open tailgate, remove straps or bars on each side. Lift passanger side corner up and out, then you can pull the rest out no problem.

Ad

Honda CR-V Tailgate Door dripping When lifted up in wet weather the underside of my '08 CR-V tailgate door drips on me. Not on the top side where snow/rain would naturally accumulate by where the ...

Question about 2001 Frontier Crew Cab

1 Answer

my tailgate wont open on 2001 nissan frontier tailgate wont open Need alittle more info. Is the handle lifting with little to no resistance, but the tailgate wont release, or can you feel the latch ...

Question about 2005 Odyssey

1 Answer

...tailgate lift up to the top, bounce three times and the close again. The door lift up by itself so I do not think it is the pistons. Try to reset the tailgate by removing the no.7 (7.5 amp) fuse in ...

...the pin. Then lift the tailgate to about a 45 degree angle and lift up and out on the passenger side. When it slides out, shift it to the right and it will come off the left peg. Hope this helps

Question about 2004 Silverado 2500HD

2 Answers

...tailgate closed and lift the handle a little and look under it (inside tailgate). You will see two vertical metal pieces. One on each side. These connect to the rods that run inside the tailgate and ...

Question about 2004 Silverado 2500HD

1 Answer

...off the same as a regular pickup truck. Open the tailgate and remove the cables from both sides. Lift up the passenger side of the tailgate and then slide the driver side towards the passenger

Question about 2004 Silverado 2500HD

1 Answer

close itself without opening. Does it still have the tailgate lift cylinders? The power tailgate lift is designed to work with the cylinders,but it won't work if the cylinders have lost their pressure

...tailgate buttons don't work or key switch? Dash button, lift gate buttons inside and on the lift gate also key assemble will glass pop open with remote or key ,whe nyou turn handle if so you ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85178 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

john h

Level 3 Expert

22401 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...