Questions & Answers for: tail light fuse

...tail light fuse? I can't find a reference to the tail light fuse in the owner's manual. My tail lights won't work but the brake lights do. Any suggestions? The fuse is no.8 (15amp) in the interior ...

tail light fuse, on the dodge ram the dash lights and tail lights use the same fuse so if the tail light fuse blows your dash lights will go out to alert you of no tail lights. I have a 1998 dodge ram

...tail lights and instrument cluster lights. Usually both of these light systems are powered by the same fuse so when your cluster isn't lit up you'll know right away that your tail lights aren't ...

...put their dash lights and tail lights on the same fuse so that you would notice immediately when the fuse for the tail lights failed. Find the tail light fuse in your fuse box and check

...tail light fuse in it. the lid of the fuse box is showing location of fuse. as far as your interior light goes, make sure that you have the switch in "door" position or it will not come on when door ...

tail light fuse location honda crv I had this problem with my 2007 Honda CRV -- all the lights worked EXCEPT the tail/running lights and the license plate light. The other tail lights worked -- brake,

not have tail lights. I read there is a relay under the hood but have not been able to find it. In driver's side J/B1 where you found and replaced the 10A TAIL FUSE, you will find the TAIL-LIGHT RELAY

tail lights don't work and instrument panel won't light up on 2007 corolla clock, radio, lights work you blew a fuse. check fuses in both fuse boxes.. ahh yes, the IP cluster lamps are dad, but not ...

...tail light's as well? Chevrolet's dash light's wont work if you have blown a tail light fuse. Their way of letting you know you have no tail lights. check the tail light fuse and go from there. Good ...

...tail light and probe both ends of fuse for power. Hope this helps Mike First check the drivers manual to find the fuse for the tail lights. turn the lights on , probe each of the fuse holder must be ...