Questions & Answers for: tahoe turns driving

Question about 2004 Tahoe

1 Answer

...keeps turning off while driving a short disance my Tahoe will turn off and if i let it sit for 5 mins. it will turn back on. ck electical part of ignition switch could be getting hot and shuting ...

Ad

02 Tahoe LT Hesitation when warmed up , When the tahoe is warmed up (running for a while) when i slow down to make a turn and turn the wheel almost all the way around, it hesitates and makes a rough ...

Ad

...Tahoe with 188000 miles. While driving the engine just quit. There is oil pressure on cranking but it will not turn over. I have checked just about everything I can think of including the ignition ...

Question about 2002 Tahoe

1 Answer

driving. 2002 tahoe with flex fuel. Died while I was driving and will not start. It will turn over but not fire. Shop says that it most likly is a fuel pump. It was replaced and is still not firing...

tahoe has power. however, will drive for short time then no longer will pull. still has full power. can turn tahoe off. let set for short time, then will drive short distance and then will not pull ...

...Tahoe Transmission slips after driving for 5 minutes I have a 2003 Tahoe that drives fine for the first 5 minutes. After that the transmission starts slipping and then it won't go in gear at all. If ...

...TAHOE LT 56000 MILES PUT TRUCK IN DRIVE SAYS RIGHT REAR DOOR AJAR INSIDE LIGHTS WILL NOT TURN OFF. CHECKED THE DOOR CLOSED IT SEVERAL DIFFERENT TIMES SAME THING. LIGHTS DID NOT TURN OFF UNTIL SAFETY ...

Question about 1999 Tahoe

2 Answers

The right side rear stop, turn signal and back up light does not work on my 1999 Chevy Tahoe. However the right front turn signal works. This happens only when the weather is cold and once i drive the

...tahoe shut down while driving it was driving fine i have no check engine light on, however i did notice when i would try to crank it up it wouldnt turn over immediatly then the second time it would ...

...Tahoe died while driving and would not restart and OBD-II won't read codes and will not turn over. I have replaced the battery, Cam Positioning sensor, crank positioning sensor, an starter. what's ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...