Questions & Answers for: Sharp system is down

system in standby (ie off but plugged in) then whilst pressing down the record button and the X-BASS/DEMO button, press the PRESET DOWN (i.e.left hand one) button until "CLEAR ALL" appears, then power

When the system is powered on and began to play, shortly after the system shuts down and display "protect" Change the audio amplifier IC is damaged

...shut down is caused by overload protection, there might be a clog on the system tubing or the compressor need replacement.In rare cases the start up device (relay or PCT) may also cause that

system keeps shutting down and briefly flashing "protect" on the display. It will stay on only a few seconds or minutes before shutting itself down. Has been working fine and no changes have occurred.

...System: stereo shuts down and reads protect... Stereo shuts down and reads protect Hello, the problem of you stereo appliances been shut down was as result of a mechanism jam of the system. The way ...

...system most sharp reset by pressing the power button to enter the power stand-by-mode while pressing down the volume down button ,press the power button un-til ALL CLEAR appears...hope this ...

...or down button to select SYSTEM SETUP and press ENTER button.3. press the cursor up or down to select RESTORE INFO and press ENTER button.4. Enter 2486 and ENTER this will restore to factory ...

...system shutting down is when the sound IC on the system is getting weak and can't power the system volume up to the max volume range,itshuts down. It's Protecting the system form getting damaged by ...

down the system after a presentation? hi, To cool down the projector after use just press the Standby button and leave it in standby mode. The projector itself will cool down and will shut down itself

How do I shut off the parental controls on my Sharp CD-DVD500? With a disc in the drive press SETUP whilst holding down the SHIFT. UP or DOWN to PARENTAL SETUP and press ENTER Using 0 - 9 Buttons ...