Questions & Answers for: switching door hinge kenmore elite

Question about Elite 45986 Front Load Washer

1 Answer

...frame remoive them and the 2 pieces will seperate. you can replace it then. be carefull if you remove the screws from the hinge the whole door will fall off. only six or so screws need to be ...

Ad

Question about Elite 45986 Front Load Washer

1 Answer

Kenmore elite HE3T will not unlock and the error code of du blinks on & off and then the f. I have unplugged it, tried to rerun it, try to open the door, and even have unplugged it. It aslo make a

Ad

Question about Elite 45986 Front Load Washer

1 Answer

signal. I checked continuity on the pressure switch, 1 and 3 were closed, all overs were open. I have a Kenmore Quiet Pak 4 He3T-the washer won't start because the door is showing an error-not secured

...Kenmore Elite HE3t 11042922200 Front Loading Washing Machine. the washer makes bad noises when it goes to 1st rinse and spin cycle, stops and says F02 - (Drain Problem) Door is locked and will not ...

Question about Elite 45986 Front Load Washer

1 Answer

Kenmore elite HE3t front loading washer. Stuck on 1 minute left on cycle but I cannot cancel or re-start the machine. Door can open (I have removed clothes already) unplug it about 5mi plug back in ...

Kenmore elite hE3 washer has f32 code flashing. Door is locked and would not open. F/32 error code; this indicates a pressure switch failure. The Sud error code indicates a suds lock condition. Be ...

Question about Elite 45986 Front Load Washer

1 Answer

...Kenmore washer door? Hi from retired Englishman in SW France, If the doors were interchangeable I would expect that to be a selling point (!) and mentioned in the manuals ;-0) The problem is that the ...

Question about Elite 45986 Front Load Washer

1 Answer

Elite HE3t washer, in the middle of a load, it stopped. it flashes dL, F door lock error...door lock mechanism broken,,,replace door switch,,,if your lock out remove toe panel and reach up and pull ...

...Kenmore Elite oasis dryer. It will not start and the time shown switches to a blinking letter"F". It says to check the lint trap, and it is completely clean. How can I get it to start? Elite Oasis ...

...kenmore elite he3t washer and when it gets to the spin cycle it doesn't spin what could be the problem? could be a bad door switch, bad motor coupler or clutch or even a busted belt depending on ur ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29492 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...