Questions & Answers for: Oldsmobile Cutlass switch

Ignition switch I need to know how to remove the ignition switch on a 1998 Oldsmobile Cutlass. If equipped, disable the SIR system as outlined in . Disconnect the negative battery cable. Remove the ...

...not working. third light works when i press the pedal. all other bulbs work. some say turn signal switch (if so, why?) some say break switch. where do i begin. It is not the brake switch as the ...

...fan wont come on when car reaches operating temp unless you unplug and replug the cooling temp switch There is either a break in the cable, which when you push the plug back on you get

...normal behaviour (i.e. courtesy lights) amd they are not shutting off, you should change the brake switch. it is located above the brake pedal "arm" and it is usually white.you may see two of them. ...

replaced the bulbs and checked fuse but the brakelights fail to work. Could it be a switch. Yes, it could be the switch behind your brake pedal. Remove the driver's side instrument panel trim ...

Known problem with multi-function switch (turn signal switch), but haven't replaced it yet. Recently the power windows, sunroof, AC, and blower motor stop working all at once. Could this be related to

is there a "neutral safety is there a "neutral safety switch" on the transaxle that if it goes bad will prevent the car from starting? most automatics have a safety switch so they can only ...

...cutless? GM headlights are not fused, there is a circuit breaker that is part of the main light switch. I suggest you remove the headlight switch and check it for a burned connector (common), if ...

1998 olds cutlass driver side window switches dont work except for the switch that controls the passenger side front door window that works but all others dont work, would that mean need a new switch ...

...When I refer to "relay" it could also mean the starter and relay as 1 unit. Note: "starter switch" is not to be confused with "key switch", although sometimes they are all one unit. The ...