Questions & Answers for: swing steering wheel

Question about 1988 Thunderbird

1 Answer

Swing-Away steering wheel on 1964 T-Bird convertible doesn't swing...at all. Help please! There is a locking pawl that is connected to the shift lever. When it is in park, the pawl is disengaged and ...

Ad

...steering fluid leaking checked the lines its coming from the drivers side clean it 7 run agin to pinpoint the leak by swinging thw steering wheel back & forth Cheers rob check where is the ...

Ad

steering wheel, the entire front axle turns, not just the steering links. The axle swings on the single pin in the center, and it looks like something in there is worn. Also - when you set the tractor

...steering head preload adjustment. misaligned wheels swing arm bushings or bearings, swing arm bearing preload, worn defective shock, bent frame, rims. forks. misaligned forks. fork stiction. ...

steering wheel will rotate about an inch, while in the locked position, do the following: 1) swing the wheel as far as it goes, then hold it tightly in position (it may want to return back to position

Question about 1999 Caravan

2 Answers

...steering wheel and it's what keeps connections for steering wheel controls. Makes sense in that area but I can't explain the twin wire swinging free without a connection.This happened taking steering ...

Question about 2008 FLHRC Road King Classic

1 Answer

...clamp is a star adjuster ring. Tighten to decrease swing (tightening bearings). Loosen to increase swing (loosening bearings). Reinstall steering stem nut (60-80 ft/lbs). Reinstall headlight

Question about 2006 Tribute

1 Answer

...steering arm just before the tracking, looks like a swing, it attaches to the body shell and has a bolt and rubber innards, this dampens down the vibration on the longest arm to the wheel so on right ...

...STEERING GET HARD TO SWING IT BACK Check wheel bolts (are they missing or loose) then steering linkages. The most likely cause is steering ball-joint(s) or anti-roll bar mountings or rubbers.
Not ...

...now no power steering what's wrong you need to bleed the system, usually swinging the steering wheel lock to lock will bleed the steering box/rack. you did connect the right hoses to the right ports

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...