hybusa turbo stalls out when going through gears, bike stalls out when you back off on throtle. this bike is a busa with a kahn turbo . bad blowoff valve...
loose chain Can you clarify your question please, is you chain old? does it need replacing or do you need instruction on how to adjust it?
looking for nip to bleed clutch The clutch Slave cylinder is on the left side of the bike just ahead of the driver footpeg. You will have to move the left lower fairing out of the way to access it. It
HAYABUSA SLIPS BETWEEN FIRST AND SECOND GEAR UNDER HARD ACCELETATION BUT DOES FINE DURING ORDINARY DRIVING your clutch is slipping. replace it not so you all you need to replace is the fiber plates. ...
Question about 2004 GSX 1300 R Hayabusa
Bike starts ok,but when ridden it miss fires when under load if its a croch rocket its not miss fireing its eigher there is to much weight or you need to get a power camander to fix. change engine ...
Question about 2004 GSX 1300 R Hayabusa
i changed to led lights all round blew a fuse replaced it now front 1s work but back lights dont its 2004 model iv cjecked all the lights and they all work but when i plug them onto the bike nothing ...
why would the engine cutoff when the bike gets hot possible weak mixture , or a faulty sencer ? what bike is it ?
engine starts ok, but cutsoff when hot There is a temp sensor for the engine which can go bad and could be cutting off cuz it's sensing wrong temp on the engine? check it out maybe it's your problem..
How do I remove the seat panel on a hayabusa How do I remove the seat panel insert the key for the bike at the back left side of the motorcycle into the lock. Turn it to the left. this will pop the ...
Question about 2004 GSX 1300 R Hayabusa
2004 Hyabusa and the front brakes keep locking up on me. I have cleaned the brakes lines, rebuilt the master cylinder and calipers. Was there a recall on these brakes? Hi, Jerry yes there was for more
Usually answered in minutes!
41 Questions
41 Questions
25 Questions
22 Questions
22 Questions