Questions & Answers for: sunfire start solid theft light

...sunfire, and was trying to start the thing when it was about minus 30 degrees celceus outside, the car was cranking but did not start. I went to try it the next day and the starter would not even ...

...sunfire, and was trying to start the thing when it was about minus 30 degrees celceus outside, the car was cranking but did not start. I went to try it the next day and the starter would not even ...

sunfire.....i took the bat. out and installed a new one and it won't start,the theft light is on solid when the key is on.i tried the 10 min. on and off and 10 back on and its not working.thanks chuck

...Sunfire. After replacing the alternator, the Anti Theft light came on solid and would not allow me to start the car. I tried the "10 minute" fix... that didnt work. I tried cutting the yellow wire ...

...stays solid on 97 pontiac sunfire and cranck but won't start VTHE key is not responding with the imobilizer or your amplifher then the ECU detects that the car is being stolen and disables all ...

...sunfire 97 replaced ignition module and crank sensor.. anti theft light is on solid and car only cranks what can i do to get the car started Repair the anti theft system as car thinks you are trying ...

...sunfire theft light is on no blink. cranks but doesnt start. Has done this before had given up on it and one day it started when trying it. Had done nothing to it but let it sit. Now it decided to ...

...sunfire theft light is on no blink. cranks but doesnt start. Has done this before had given up on it and one day it started when trying it. Had done nothing to it but let it sit. Now it decided to ...

...sunfire gt and it starts runs for a second and dies,my anti theft light on my dash is not blinking it just stays on,does anybody know a way to bypass the anti theft so that my car will r anti theft ...

...solid on the theft control. turn off ignition then turn back on slowly. the light should not come back on. if it does come back on. take the radio out and check the wires to the radio you can do this ...