Questions & Answers for: suction is bad

...bad suction" examples I have seen. I do know that after I clean my DC07, I have to make sure that the adapter pieces are seated properly, otherwise there's an air gap. Have you tried connecting the ...

...issue. Any idea? There must be a clog in either the hose, dirt inland by the brush roll, or bad filters. If you have suction at the end of the hose, then look lower all the way to the brush

bad suction on bissell powerforce bagless vacuum The attachment hose seems to have plenty of suction but when I actually vacuum rugs, the suction is really poor. It feels like all it is doing is ...

...suction, there are only a couple of things that could cause it. As you have checked for blockage, and changed your filters, you may have a vacuum motor with bad bearings, or broken fan blades ...

bad bearing. Loss of suction would occur if the fan is loose or damaged. If the bearing is bad but the fan intact you will still lose suction as the motor will not run properly out of balance. Take it

...burning unplug until problem is found and fixed, suspect if no suction hose is blocked and if brush wheel it or the belt may be causing the smell, a bad or failing motor is less likely but

BAD SUCTION WITH ATTACHMENTS The suction seems to be getting worse when i use attachments You may have a small leak in the hose somewhere, that may be getting bigger, thus losing more suction.

BAD SUCTION WHEN USING ATTACHMENTS Bad suction often means a blockage somewhere, so check all the possible areas for blockage that relate to the hose. Also, check the hose for splits, as they often ...

...bad valve. The suction pressure is determined by the temperature and airflow going across the indoor coil. At 90 degrees or above on the outdoor temperature and 80 degrees on the indoor temperature, ...

suction is very bad changed bag cleaned roller still bad what should i do next Replace the belt if it is over a few months old. Even if the suction is great it won't pick up dirt very well if the belt