Questions & Answers for: subwoofer set up

Ad

Question about HTA-4100 System

1 Answer

...subwoofer set to PLUS on my receiver, and the relative level for the sub on 10 (as high as it will go), and the gain on the subwoofer itself almost ALL the way up, and it still sounds weak. i'm not ...

Ad

Question about SA-W305 Subwoofer

2 Answers

...access this. The subwoofer setting has to be set to between +4dB and maximum. If your subwoofer has it's own volume control set your receiver to maximum and set your subs volume from its' own

Ad

Question about AVR-1506 Receiver

1 Answer

speaker setup to turn the subwoofer on. If speakers are set to small it auto matically sets the subwoofer to ON. If the speakers are set to large it turns the subwoofer off but you can manually adjust

Question about TH-M55 System

1 Answer

...thru the subwoofer work and the lite on subwoofer work but no sound thru subwoofer. Have you gone into the menu settings and adjusted the sub woofer volume, some factory settings are set @

Question about PB10 Subwoofer

1 Answer

...set to -10dB and/or subwoofer volume too low. Result: subwoofer will not play. Example; subwoofer crossover point set at 35Hz. Source material playing sound at 30Hz and lower. Result: subwoofer will ...

Question about PB10 Subwoofer

2 Answers

check for the volume of the subwoofer see the voume sttings ACER Aspire 8735g subwoofer not working on 5.1 sound config. Subwoofer volume is set to 100% , but is not any sound in subwoofer . Any ideea

SUBWOOFER SET - BASS OUT is set to Front, rather than SWFR (subwoofer). See page 63 of the manual. https://www.yousendit.com/download/dVlvdFdaY3lJMHZIRGc9PQ or http://tinyurl.com/csw8sy Let me know if

Question about R-945 Receiver

1 Answer

subwoofer set to NONE. this will block any signal to your subwoofer socket. 2 when you select your surround sound setting setup, ensure you select the speaker mode you want, if there is a multicontrol

Question about PV600 Main / Stereo Speaker

1 Answer

...Subwoofer: PLUS (see Speaker Setting on page xx). â?¢ Check that the LFE channel is not set to -80dB , or a very quiet setting (see Bass Peak Level on page xx). â?¢ Check the ...

...SUBWOOFER" is set to "NO." Then continue with setting its relative level and other things. Be sure to set front speakers to "small" on the receiver menu. Try inputing from one of the tape outputs to ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5699 Answers

The Knight
The Knight

Level 3 Expert

76140 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you an Audio Players & Recorders Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...