dust cap that sounded like something was hitting it, upon placing my finger on the dust cap, the noise ceased. the movement of the cone seems intact, does this mean the speaker is blown? As dumb as it
...dust cap)to the speaker jl w0 10" thanks for your help! fingernail polish remover with acetone works...or carefully with a razorblade. To glue it us something like rubber cement. You want something ...
...on the back.it should read the impedance value. move the speaker back and forth and if it cuts in,the voice coil has a broken wire where it is joined under the dust cap, where the jl audio logo
...dust cap on to sub sub was turned up and cap just came off. i glued it and it melted the glue and right back off. please help urgent!!!! try epoxy. just go to home depot and get the lightest two part ...
center dust cap popped out!! whats the best way center dust cap popped out!! whats the best way to fix it? Clear Silicon.
...subwoofer that will work. Thanks. if you don't wanna get rid of it bust out your spec sheet then go here and build accordingly then rip off the old dust cap and put it back on ...
...Subwoofer and would like to know if that can be repaired, it just need to be poped back out if possible. Thanks for your time and I look forward to your call. Tommy Jackson 512-246-7777 ofc ...
...work without them. Many sellers on ebay provide speaker repair kits. Search for "speaker dust cap". One or more of the sellers may be able to supply what you need to fix them if it really bothers
What would make a good homeaid kite to repair speaker foam This ebay seller has a good reputation http://stores.ebay.com/looneytune2001 You need foams made specifically for your speaker. I prefer kits
Question about EUPHONIX Speaker
...to completely remove the old foam, clean the mounting surfaces, cut off the dust cap and shim the voice coil, install the new surround then install a new dust cap. Or send the drivers to
Usually answered in minutes!
687 Questions
481 Questions
236 Questions
236 Questions
240 Questions