Questions & Answers for: subwoofer connect

subwoofer connection Carver Surround 5.1 speaker set-up with Harman Kardon AVR 147 receiver has single RCA-type subwoofer output. Subwoofer has dual-right/left RCA input and output connections OR ...

subwoofer connection I just bought HTR6130B, yesterday and I started to connection all speaker and connections, however, the subwoofer connection is different, my subwoofer with the black and red type

...subwoofer 1 - connect both - on subwoofer 2 - connect both + on subwoofer 2 - connect both - on subwoofer 1 This will give you a 2 ohm STEREO load. To get a 1 ohm MONO load... now connect only one of ...

...subwoofer only. how do u connect it? can u jus run it say for eg. off of ur output on a laptop? and then connect high end speakers to the sub ( it has 'high level output to satelite speakers' ...

subwoofer. Connect the subwoofers to wall outlets and turn on each unit by pressing the power button, typically located on the back panel. Adjust the volume and crossover settings on each subwoofer as

THERE IS NO SIGNAL COMING FROM THE SUBWOOFER, IT IS CONNECTED TO A SONY AMPLIFIER IN THE SUBWOOFER JACK, AND CONNECTED TO THE SUBWOOFER IN THE LOW LEVEL INPUT. THE SUBWOOFER IS CONNECTED TO THE MAIN, ...

...connect a subwoofer to an amplifier, receiver or processor. The best way is to connect the subwoofer to the SUB OUT or LFE output of a receiver, but some subwoofers can be connected to the speaker ...

connect this subwoofer to a quest line amp QTA 1480 p . i am also connecting 6 speakers of 80 w @100volts to the same amp. please let me know the procedure and the method for connecting the subwoofer.

...Subwoofer. Connect the Subwoofer connection on the receiver to the LFE connection on the subwoofer. The normal connection on the subwoofer is for connecting a full range signal, from which the sub ...

...subwoofer. To connect a passive subwoofer, one without a built-in amp, the main speaker outputs connect to the subwoofer and are then sent to the regular speakers connected to additional terminals on ...