Questions & Answers for: EnGenius the subnet mask Cell Phones

...subnet mask is incorrect (most likely it is 255.255.255.0, though) 3)Your subnet mask is not matching the devices. 4)The device is at another IP address instead of 192.168.1.1 (don't laugh and don't ...

...subnet mask 255.255.255.0 . Are you having problems getting in to your router? Do not enter anything for the default user and password. Let me know what problems your having. Thanks. Jeff pls anyone ...

...subnet mask 255.255.255.0 then gateway 192.168.1.1 point your browser to 192.168.1.1 or 192.168.1.2 (one if it is in AP mode and the other address works if it is in bridge mode). When configuring, I ...

...define an IP address and a subnet mask compatible with Router as gateway. 3) If you are not sure of Router IP address use reset button on router back to factory default; use this to configure

subnet mask field with '255.255.255.0' 6. Click OK. Now you must log in to the router over the internet. To do this you must: 1. Open your browser and type the IP address of the router in the URL bar.

...interface, but my laptop sees the AP, because its NIC says is connected to an unidentified network. I run Windows Vista Basic. How do I recover my AP set IP to 192.168.1.10 subnet mask: ...

...subnet mask.Ensure that the IP address and subnet mask are on the same subnet as the device.For Example:PC IP address: 192.168.1.10PC subnet mask: 255.255.255.04. Click on the OK button to close this ...

...you reset the AP the IP of the AP device became 192.168.1.1 That means you need to set the IP address of your computer to 192.168.1.x where x is anything from 253-2 and the subnet mask to ...

...Subnet mask, Default Gateway IP Address, and Primary DNS and Secondary DNS of the xfinity wifi router. Then on the ecb350 you will need to configure the following with the info you go off the xfinity ...