Questions & Answers for: subaru pcm

Subaru Outback P0606 ECM/PCM Processor P0303 Cylinder 3 Misfire Detected This points to a possible ECM processor causing a misfire on cylinder 3, but there are no guarantees that changing the ecm will

Ad

My 1998 subaru impreza submerged in water and stayed ther for almost 2 hours. I changed its oil ,transmission oil , still the car dose not start! you have to replace your PCM, module, computer

Ad

Question about 1998 Impreza

1 Answer

...code test on my 94 subaru impressa wrx ,the codes 44 45 31 32 and 12 appeared.please,what do these mean Go to auto zone have them run the codes your pcm needs help to many problems with these ...

Question about 1998 Impreza

1 Answer

...subaru ipmreza cz, 1500cc shows ABS and Check engine. what might be the problem. you will have to have the codes pulled out of the abs and pcm(computers)to know what course of action to take in ...

Question about 1998 Impreza

1 Answer

...subaru 1990 liberty sedan remove battery cables for 5 to 10 minutes. If this does not work then touch the battery cables together while they are unplugged. this will drain all reserve voltage out of ...

PCM difference between Auto tran and Standard just changed wiring harness for auto trans to standard trans. Is PCM different? of course is different on automatic transmission to manual transmission. ...

Subaru turn over but wont start? check for spark and fuel. if you don`t have spark you will have to check for why. are there any codes in the PCM that can help. has the timing belt broken. if you have

Subaru Outback overheats when the A/C/ is turned on. How do I fix this problem? Coolant levels are fine, A/C works well. Things to check: 1. Radiator fan working properly. 2. Thermostat fully opening.

...PCM connector to the fuel pump relay. You can access wirtibng diagram at the link provided http://bbbind.com/free_tsb.html Subaru WONT START Bad Fuel Pump Relay Ground FIXED ...

I have an 05 subaru outback 2.5 xt....it it cranks and the fuel pump kicks on. Just won.t start...changed the crank sensor... Has the PCM been scanned for fault codes?

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...