Questions & Answers for: subaru fault codes

subaru wrx/sti fault 42 and 45 Hi, Fault codes as follows 45 Pressure Sensor Duty Solenoid (Turbo Models) 42 Idle Switch or Circuit Those are the correct codes for a Subaru. good luck Dan

...fault code 45, acording to subaru this is the pressure exchange solenoid valve being inoperative or the sensor for it is defective, thus causing the ecu to limit performance and generally make it run ...

...fault codes 31 and 42,42 was explained as i have a subaru impreza 1995 reg classic with the check engine light on i have fault codes 31 and 42,42 was explained as throttle possition closed i dont ...

...Subaru Forester 2.5 litre engine misfire from moisture? It wouldn't fire on all four cylinders, after freezing weather turned to winter rains, and I suspect moisture is grounding something in the ...

...please help. http://www.obd-codes.com/trouble_codes/subaru/1988-subaru-multi-point-fuel-injected-cars.php Looks like you have a Coolant temperature sensor fault and throttle positioning ...

...subaru forester any ideas? When i looked up the code it said to replace the oxygen sensor or the air flow sensor? I think these codes are indicating a fault with your catalytic converter. The 02 ...

...fault codes for the 1992 Subaru SVX may be available through autozone.com's website if you input the year, make, model and then click the Repair Info. tab. I cannot copy and paste the entire document ...

...subaru forest 1999? code p0141 refers to heated oxygen sensor-2 bank1 heater control-circuit malfunction ===causes --wiring--Heated oxy sensor---ECM I would replace the sensor first and see it that ...

...Subaru impreza 2.5i bogs out when I step on the gas , then smooths out . I already changed the MAF sensor . What else could it be? plastic accelerator pedal sensor should be fault codes to read if it ...

1999 Subaru Outback AT 2.5 no Overdrive P1705 Code Subaru fault code P1705 is 2-4 Brake Pressure Solenoid Valve (Solenoid D) Circuit