Questions & Answers for: subaru coil pack wiring

...on my 1990 subaru legacy LS 4wd replaced coil pack, spark plugs, wires, and still has same problem. Did you try an ignition module?This could be your problem.Make sure you have good

coil wiring 2000 subaru forester does not start. has no spark. Are there any other possible problems, or you are just not receiving spark at all now? The coilpack could be dead and just need replaced.

...coil pack common problem I work as a mechanic for subaru and both have to be replaced no a hard job if you want to doit yourself if the plug and wires are ok i would replace the coil pack and if your ...

Subaru gl, its now getting no spark, I know that because it died on my way to work, I added gas, hoped for the easiest thing. We did the spark check, I was told maybe its my coil pack, thing is I have

coil pack on subaru legacy I've been looking, but unable to find, any information on how to replace the coil pack on my legacy. I believe that is what is causing my engine code P0303. Cylinder

...subaru outback, missfire code - cylinders 1 and 3. Could it be coil or plugs and wires I'm told at service shop. Anybody come across this? had miss fires with my 92 legacy gt.typical suby fault coil ...

no spark on number one from coil Subaru is noted for there coils to loose ground. Remove the coil pack and clean where it mounts. Also check plug wire for #1 cyl.

...subaru forester have a forester that is getting a p0106 code error need to check map sensor to see if connections ok, wires frayed, ect., or needs replaced its to the right of the ignition coil pack ...

...Subaru forester is not firing on one coil pot to the plugs what could be the problem its now losing power and consuming more fuel with an brubrubru sound. Gift On the Forrester it could be the coil ...

Coil Pack from a Subaru wrx I'm having trouble finding a wiring digram. As you can see in the pitcure the wires are as followed......., -Black -Yellow -Blue and Red w/White Trace Wiring diagram. http: