Questions & Answers for: Pontiac Grand Am style master

i have no pressure in the clutch and changed the master cylinder you need to bleed master & slave cyl master dont hold much fluid must bleed similar like brks when when starts coming out of ...

Ad

...side)of a 1996 pontiac grand am fit a 2001 pontiac grand am? No that will not fit the the body style changed in 98 see pontiac grand am 96-98 had the same body style and body parts. so i dont ...

Ad

...that. do not want to chg stereo, just speakers any aftermarket speaker you buy will not have that style plug. you need to cut off the original connector on the wiring, and use the connector for the ...

Question about 2004 Grand Am

2 Answers

...GM vehicles where the ABS sensor is integrated with the wheel bearing/hub. These sensors are in two styles. One style bolts the sensor directly on the wheel bearing. The sensor counts the notches on ...

how do i bleed the brakes on a 1999 Pontiac Grand Am? Bleeding the Brake System When any part of the hydraulic system has been disconnected for repair or replacement, air may get into the lines and ...

Question about 1999 Grand Am GT

1 Answer

master cylinder and bled out the brakes. The brakes are still the same. (spongy) and lose pressure. So we bled the brakes some more. Now we went thru a gallon of brake fluid and there is no difference

Question about 1999 Grand Am GT

2 Answers

I have a 2001 pontiac grand am and my car makes a vacuum noise when i put on the brakes and the brakes go to the floor and then my abs, trac off and service vehicle soon light comes on. Does that mean

Question about 1996 Grand Am

1 Answer

New brake pads installed and still the brake pedal still goes all the way down and it sounds like the air is on but its coming from the brakes n i bled the brakes but they still don't work. Check ...

1994 Pontiac Grand Am Brake pedal sinks to floor. I'm having an issue with fixing my sister's car. The pedal sinks to the floor and i'm not sure what it can be . We replaced ...

Question about 1994 Grand Am

1 Answer

replacing the master cylinder the resivor isnt connected to where the brake lines go out and im unsure if any kind of a master cylinder for my car will work You can locate your master brake cylinder ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...