Questions & Answers for: Ducati style master

Question about 2003 748

1 Answer

748 brake conversion I have a complete(calipers lines and master cyl) front brake system from a 999. Should this bolt on to a 748 or are there any other mods needed.Check fit the master cylinders on ...

Ad

Question about 2001 748 S

1 Answer

748 brake conversion I have a complete(calipers lines and master cyl) front brake system from a 999. Should this bolt on to a 748 or are there any other mods needed.Check fit the master cylinders on ...

Ad

Question about 2003 ST 2

1 Answer

...style master cylinders from at least 1987 through 1999 and they interchange with the remote reservoirs of the 2000-2002 ST bikes.......I know for a fact that the levers from the 1998 ST2 are ...

Question about 2008 Monster S4Rs Testastretta

1 Answer

Clutch pedal won't come back after fully engaged Clutch was working ok for a while (only losing slight pressure when fully enaged). Now it's completely not working. It won't come back after being ...

high speed compression is almost non-existant on 848 stock rear shock . By changing valve and stack for better oil flow can we exxpect better performance or is this an issue with the set-up i.e. pivot

Question about 2006 Monster S2R

1 Answer

rear brakes not working brakes not working, changed master cylinder, unable to get pressured up put a tube on the bleeder into a bottle, undo the bleeder half a turn, and pump away. or if there is a ...

Question about 2006 Paul Smart 1000 LE

1 Answer

...Does your bike have the new CAN wiring? Little thin wires running all over the place or the old style fat wires? If it is new style, you shouldn't have a problem with it getting wet, but the old ...

Question about 2006 Paul Smart 1000 LE

1 Answer

fuse short While riding I had no dash lights and the immobilizer light was flashing. I turned the bike off to, hopefully, get my dash back and the immobilizer light off but then it wouldn't ...

rear brake master cylinder over heating Hi, Melvynjacobs the pistons inside could be stuck/crooked due to contamination and are not releasing fully causing drag and heat for more information about ...

Question about 1978 900 SD Darmah

1 Answer

...between the front and rear cylinders is also a problem. But I have also found that riding styles also affect how long it takes a plug to foul. I tend not to ride the bike hard by keeping

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Ducati Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Ducati Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...