Questions & Answers for: HP OfficeJet stuck on test

Question about OfficeJet 6210 All-In-One InkJet Printer

2 Answers

stuck in a Self Test mode. The power light was not on and no other buttons worked. I unplugged and tried it again. It starts going through a self test mode and the little rectangle makes it way across

Ad

Question about OfficeJet 6210 All-In-One InkJet Printer

1 Answer

...stuck. I move it and immediately does it again. Now it is flashing and error code. All the lights are flashing. When I turn it off it does a self test. Then it shuts down completely. clean the track ...

Ad

Question about OfficeJet 6210 All-In-One InkJet Printer

1 Answer

...stuck in self test mode when the printer is plugged everything on the lcd screens lights up but there in no response from the printer Try unplugging the printer for a minute and then plugging it back ...

Question about OfficeJet 6210 All-In-One InkJet Printer

1 Answer

...stuck at one of the test or one of the tests fail then the unit is inoperative until the fault is fixed. What you can try is taking the power cord out from the unit while its stuck wait 2 minutes and ...

Question about OfficeJet 6110 All-In-One InkJet Printer

1 Answer

...job manager and see if there is a test print stuck in there. If you can delete it it should stop. If not you can manually delete the the spooled file or uninstal and then reinstall the print

Question about OfficeJet 7110 All-In-One Thermal Printer

1 Answer

stuck on self test message at Power Up I have an HP OfficeJet 7110 all-in-one printer. When I plug in the power cord it has a message "Self-Test" on the LCD screen that just stays there and nothing ...

Question about Officejet 7210 All-In-One InkJet Printer

1 Answer

test page Check if the cartridges are not empty. If they have ink, follow the steps below 1. Disconnect the power cable from back of printer 2. While holding the # and 6 button, connect the power cord

Question about OfficeJet 6210 All-In-One InkJet Printer

1 Answer

...stuck? Remove the printer data cable & restart the PC & printer. Then fit back the data cable & turn on the printer. Hope that's start working , if no luck then Uninstall the printer ...

Question about Officejet 4110 All-In-One InkJet Printer

1 Answer

...stuck papers.Run a print test by:Press setup on the printer menupress 1 and then press 4Press start color/start black.Your officejet now runs a print test.Hope this helps.Thanks!Please rate this ...

...stuck half way in before it can print every time! black ink is FULL, yet it does not print...can't print test pages either! Clean the mess in ur printer if u dnt knw how to clean call expert ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...