Questions & Answers for: Frigidaire stuck solenoid Motorcycles

solenoid is in the down position then put the bucket back in. Let me know what you find. Voila! As I prepared to remove the back plate, behind the ice bucket,I put my finger into that square hole that

stuck dispenser solenoid. look in the back of the freezer where the bucket shift arm enters the drive assembly. i would guess the actuator is stuck in the "up" position. the solenoid usually sticks up

...solenoid was stuck. I opened the access panel at the bottom but I can't reach the solenoid which I assume is part of the door latch. Thank you! unplug the machine and the door lock will release... to ...

...stuck on crush,the light is on cube. You have a solenoid switch which switches the dispenser back and forth from crushed to cube. It could be stuck or not working or the parts connecting it could be ...

solenoid energized. It could be stuck or not working or the parts connecting it could be disconnected or broken. You will have to observe to see if any parts are moving and if any noise is coming from

...stuck water solenoid valve. Under your sink, there is a water line that connects directly to your dishwasher. That line is always on, so it's always under pressure, unless you turn off that valve ...

...stuck solenoid valve. The solenoid is working fine now but I reattached one or more hoses incorrectly. I have 2 white, 1 green, 1 yellow, and 1 tan hoses. The solenoid valves are all working fine now ...

...stuck reversing valve that needs a couple of light taps with a soft mallet or a faulty reversing valve solenoid. Make sure the solenoid is getting power. if no power, the thermostat is the problem. ...

...solenoid is stuck in the up position. I push down on it and can feel resistance from the solenoid, which pushes it back up. This is true no matter which button is pushed, cube or crushed. It seems ...

washer fills with water and it's not turned on Sounds like water control solenoid is stuck in the open position. The hot and cold solenoids are located just inside where the hoses attach to the washer